Effect of ‘Zn’ substitution on structural,morphological, magnetic and optical properties of Co–Zn ferrite nanoparticles for ferrofluid application

Journal of Materials Science: Materials in Electronics - The Co1?xZnxFe2O4 (Co–Zn) ferrite nanoparticles with x varying from 0.0 to 0.4 have been manufactured by facile chemical...     

Resistive organic memory devices based on nitrogen-doped CNTs/PSS composites

Journal of Materials Science: Materials in Electronics - Non-volatile organic memory devices were fabricated using polystyrene sulfonate (PSS)?+?nitrogen-doped multi-walled carbon...     

Synergic effect of Sn-doped TiO2 nanostructures for enhanced visible light photocatalysis

Journal of Materials Science: Materials in Electronics - In the recent years, metal oxides have attracted more interest for researchers because of their applications in energy and...     

Analysis of pressure and heat distribution in a dilating or contracting filter chamber with two outlets using multivariate spectral quasilinearization method

The development of efficient filters is an essential part of industrial machinery design, specifically to increase the lifespan of a machine. In the filter chamber design considered in this study, the magnetic material is placed along the horizontal surface of the filter chamber. The inside of the filter chamber is layered with a porous material to restrict the outflow of unwanted particles. This study aims to investigate the flow, pressure, and heat distribution in a dilating or contracting filter chamber with two outlets driven by injection through a permeable surface. The proposed model of the fluid dynamics within the filter chamber follows the conservation equations in the form of partial differential equations. The model equations are further reduced to a steady case through Lie's symmetry group of transformation. They are then solved using a multivariate spectral-based quasilinearization method on the Chebyshev–Gauss–Lobatto nodes. Insights and analyses of the thermophysical parameters that drive optimal outflow during the filtration process are provided through the graphs of the numerical solutions of the differential equations. We find, among other results, that expansion of the filter chamber leads to an overall decrease in internal pressure and an increase in heat distribution inside the filter chamber. The results also show that shrinking the filter chamber increases the internal momentum inside the filter, which leads to more outflow of filtrates.     

A numerical model to predict the powder–binder separation during micro-powder injection molding

The micro-powder injection molding (micro-PIM) process has the potential to bridge the gap between the design and manufacturing of micro-components that are often used in small and handy devices. Numerical modeling helps to analyze and overcome various difficulties of micro-PIM. In the present work, a numerical model is developed to predict the powder–binder separation (a common defect in PIM and especially severe in micro-PIM) during the injection of an alumina feedstock. A powder–binder separation criterion is proposed dealing with applied injection pressure and friction force between the powder and binder. An indirect comparison of feedstock travel time between two locations is used to validate the model. The predicted segregation from the simulated result is supported by a qualitative experimental measurement. The developed model can be used to optimize injection parameters to get a defect-free product.     

Intermetallic and dispersoid structures in aa3104 Aluminum alloy during two-step homogenisation

During homogenisation of the AA3104 cast ingot, a phase transformation of intermetallic particles from β-Al₆(Fe,Mn) orthorhombic phase to harder α-Al_x(Fe,Mn)₃Si₂ cubic phase occurs. The large constituent intermetallic particles, regardless of phase, assist in the recrystallisation nucleation process through particle stimulated nucleation (PSN). Ultimately, this helps to refine grain size. The sub-micron dispersoids act to impede grain boundary migration through a Zener drag mechanism. For this reason, the dispersoids that form during homogenisation are critical in the recrystallisation kinetics during subsequent rolling, with smaller dispersoids being better suited to reverse rolling mills. This work simulates an industrial two-step homogenisation practice with variations in the peak temperature of the first step between 560 °C and 580 °C. The effect of this temperature variation on the intermetallic particle-phase evolution is investigated. The aim is to identify the ideal intermetallic phase balance and the dispersoid structure that are best suited for hot rolling on a single stand reversing mill, in order to minimise recrystallisation during rolling through maximising Zener drag and maintaining galling resistance. The results indicate a trend where an increase in homogenisation temperature from 560 °C to 580 °C yields, firstly, an increase in the volume fraction of the α-phase particles to greater than 50% of the total volume fraction at both the edge and the center of the ingot and, secondly, it yields an increased dispersoid size. Thus, in the context of a reverse rolling operation, a lower temperature homogenisation practice produces a near-ideal combination of intermetallic particle-phase distribution, as well as dispersoid size, which is critical for Zener drag and the minimization of recrystallisation during the hot rolling processes.

Graphical abstract

SEM BEI images and corresponding EDS maps, highlighting the variation in intermetallic particle phase balance, size and morphology after homogenisation at different temperatures. With a focus on the exaggerated differences seen between material the center of and at the edge of a DC cast ingot of AA3104 Aluminum alloy.

     

Localization of isotropic and anisotropic wireless sensor networks in 2D and 3D fields

Telecommunication Systems - Internet of Things (IoT) has changed the way people live by transforming everything into smart systems. Wireless Sensor Network (WSN) forms an important part of IoT....     

Use of by-Product Gasoline Fractions Produced by Combining Fuel and Petrochemical Production

Chemistry and Technology of Fuels and Oils - This article considers the alternatives for treatment of the raffinate produced at a unit for the extraction of benzene-containing fractions and the...     

Pursuit Problem for Fractional Differential Systems with Pure Delay

Cybernetics and Systems Analysis - The pursuit problem for linear fractional differential systems with pure delay is considered. A scheme of the method of resolving functions for these...